Principle of Portable Ultrasonic Thickness Gauge

The principle of the portable ultrasonic thickness gauge mainly adopts the principle of pulse reflection ultrasonic thickness measurement. The time interval required by the test piece, and then the thickness of the test piece is obtained according to the propagation speed of the pulse in the test piece.

The thickness D of the test piece can be calculated by the following formula: D=VT/2 (1),where V is the speed of sound in the material to be tested, and T is the time it takes for the ultrasonic pulse to travel back and forth between the two surfaces of the test piece.

The principle of pulse reflection ultrasonic thickness measurement is simple, and it works in pulse mode, which makes it easier to implement on the instrument, and it is easy to achieve small size, high speed, high precision and low power consumption.

 

 

For more information on this source, please visit TITLTEST.COM If you need to know more details, please contact support@titltest.com

Ultrasonic thickness gauge

Leave a comment

All comments are moderated before being published

Blog Categories