Descripción
Calibration Test:80±2
Material : Special alloys
Weight: 16kg
Calibration Steel Anvil
In order to make sure test hammer in good status, we should calibrate it regularly. Generally, if test hammer was used a lot, we can calibrate it according to using situation. Calibrate anvil is a helpful device and easy to operate. JW225 calibrate anvil is specially used to calibrate test hammer.
The hardness of the anvil is HRC60±3. If user doubt about the rebound value or test hammer was used too much, we can calibrate test hammer on calibrate anvil, set steel anvil on hard concrete, operate concrete test hammer on it, see if the rebound value fall in the range of 80±2(for test hammer with impact energy of 0.735J and 0.196J, it’s calibrate value should be 74±2), when we checking test hammer on the anvil, we should test many times, if the rebound value is in the range, we can confirm that the test hammer in a good status. But we must clear that calibrating test hammer by the anvil is the most direct and convenient way, not exactly sure that the test hammer totally in the best status. Other inspection ways for test hammer should be taken into reference too.
Payment & Security
Su información de pago se procesa de forma segura. No almacenamos los detalles de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.