Measuring Microhardness with the Vickers Hardness Scale

Microhardness testing is a crucial technique in materials science and engineering, allowing us to assess the hardness of small and delicate materials at a microscale. The Vickers Hardness Scale is one of the most commonly used methods for measuring microhardness. In this article, we will explore the principles and procedures of measuring microhardness with the Vickers Hardness Scale.

The Vickers Hardness Test:

The Vickers Hardness Test involves pressing a pyramid-shaped indenter with a precisely known load into the material's surface. The indenter typically has an angle of 136 degrees between opposite faces. The applied load can vary, but a common value is 1 kgf (kilogram-force). The test creates an impression in the material.

Measuring Microhardness:

When it comes to microhardness, the Vickers Hardness Scale is particularly useful. Microhardness is defined as the hardness measurement taken at loads less than 1 kgf. In the Vickers test, the smaller loads make it ideal for measuring the hardness of thin films, small components, and even individual microstructures in materials.

Procedure for Microhardness Testing:

Sample Preparation: Prepare the sample by polishing its surface to remove any imperfections.

Load and Dwell Time: Apply the desired load (typically less than 1 kgf) and allow it to dwell on the material surface for a specific time.

Indentation: The Vickers indenter is pressed into the material's surface, creating an impression.

Measurement: Measure the dimensions of the indentation, typically the lengths of the two diagonals.

Calculate Hardness: Use the Vickers Hardness formula to calculate the hardness value (HV) based on the load and indentation dimensions.

Applications:

Microhardness measurements using the Vickers Hardness Scale find applications in various fields, including metallurgy, semiconductor industry, and quality control. This method is invaluable for assessing the hardness of microcomponents and surface coatings.

vicker hardness scale

Conclusion:

Measuring microhardness with the Vickers Hardness Scale provides a reliable and accurate means of assessing the hardness of small and delicate materials. Its versatility and precision make it an essential tool for various industries and research endeavors where microscale hardness evaluation is required.

 

Vicker hardness scale

Deja un comentario

Todos los comentarios son moderados antes de ser publicados

Blog Categories